FSB50825US Datasheet | Fairchild Semiconductor

FSB50825US Smart Power Module (SPM®) October 2008 Smart Power Module (SPM®) Features - 250V 8A 3-phase FRFET inverter including high voltage integrated circuit (HVIC) - 3 divided negative dc-link terminals for inverter current sensing applications - HVIC for gate driving and undervoltage protection - 3/5V CMOS/TTL patible, active-high interface - Optimized for low electromagnetic interference - Isolation voltage rating of 1500Vrms for 1min. - Surface mounted device package - Moisture Sensitive Level (MSL) 3 General Description FSB50825US is a tiny smart power module (SPM®) based on FRFET technology as a pact inverter solution for small power motor drive applications such as fan motors and water suppliers. It is posed of 6 fast-recovery MOSFET (FRFET), and 3 half-bridge HVICs for FRFET gate driving. FSB50825US provides low electromagnetic interference (EMI) characteristics with optimized switching speed. Moreover, since it employs FRFET as a power switch, it has much better ruggedness and larger safe operation area (SOA) than that of an IGBT-based power module or one-chip solution. The package is optimized for the thermal performance and pactness for the use in the built-in motor application and any other application where the assembly space is concerned. FSB50825US is the most solution for the pact inverter providing the energy efficiency, pactness, and low electromagnetic interference. Absolute .. Symbol VPN ID25 ID125 IDP PD VCC VBS VIN TJ TSTG RθJC VISO Maximum Ratings Parameter Conditions Rating 250 TC = 25°C TC = 125°C TC = 25°C, PW < 100μs TC = 25°C, Each FRFET Applied between VCC and Applied between VB(U)-U, VB(V)-V, VB(W)-W Applied between IN and 4 1.6 8 14 20 20 -0.3 ~ VCC+0.3 -40 ~ 150 -50 ~ 150 Each FRFET under inverter operating condition (Note 1) 60Hz, Sinusoidal, 1 minute, Connection pins to heatsink 8.8 1500 Units V A A A W V V V °C °C °C/W Vrms DC Link Input Voltage, Drain-source Voltage...