FCPS-24E Datasheet | Fire Lite Alarms

FEATURES • Requires input trigger voltage of 9.0 - 32 VDC. • Contains two, fully-isolated input/control circuits (triggered from FACP Notification Appliance Circuit [NAC expander mode] or jumpered permanently on [standalone mode]). • Two Class A (Style Z) or Class B (Style Y) Notification Appliance Circuits (circuits 1 & 3). • Two additional NACs that may be individually configured for Class B (Style Y) operation only (circuits 2 & 4). • 6 Amp full load output (3 amps max./ckt.) in NAC expander mode (UL 864). • 4 Amp continuous output in stand-alone mode (UL 1481). • In stand-alone mode, output power circuits may be configured as resettable (reset line from FACP required) or non-resettable. • Fully regulated and filtered power output (optimal for powering four-wire smoke detectors, annunciators and other system peripherals requiring regulated/filtered power). • Fuseless, power-limited technology meets new UL powerlimiting requirements, effective May 1, 1995. • Normally closed trouble contact. • Fully supervised power supply, battery and Notification Appliance Circuits. • Selectable earth fault detection. • AC trouble report selectable for immediate, 8 or 16 hour delay. • Optional ammeter/voltmeter. • Works with virtually any UL 864 fire alarm control which utilizes an industry-standard reverse-polarity notification circuit. • Self-contained in pact, lockable cabinet (15" [381 mm] H x 14.5" [368 mm] W x 2.75" [70 mm] D). • Includes integral battery charger capable of charging up to 7.0 AH batteries. • Fixed, clamp-type terminal blocks acmodate up to 12 AWG (3.25 mm²) wire. ST AND ARDS and CODES STAND ANDARDS The FCPS-24F plies with the following standards: • NFPA 72 National Fire Alarm Code. • UL 864 Standard for Control Units for Fire Alarm Systems (NAC expander mode). • UL 1481 Power Supplies for Fire Alarm...