LB2S Datasheet | First Silicon

Features Low Profile: Typical height of 1.4mm Ideal for automated placement High surge current capability Solder Dip 260 40seconds Mechanical Data Case:SOPA-4 Epoxy meets UL-94V-0 Flammability rating Terminals:Matte tin plated ldads, solderable p J-STD-002B and JESD22-B102D Polarity:As markde on body Maximum Ratings and Electrical Characteristics (TA=25 Co unless otherwise noted) Parameter Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectif ed current (see Fig.1) on glass-epoxy P.C.B. on aluminum substrate Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Rat ng for fusing (t < 8.3ms) VRRM VRMS VDC IF(AV) IFSM I2t 200 140 200 Maximum instantaneous forward voltage drop per leg at 0.4A Maximum DC reverse current at rated DC blocking voltage per leg TA = 25o C TA = 125o C Typical thermal resistance per leg (Note 1) RθJA RθJL Typical junct on capacitance per leg at 4.0V, 1.0MHz Operating junction and storage temperature range TJ, TSTG Notes 1. Device mounted P.C.B with 0.47x0.47''(12mmx12mm) Copper Pads. 2. JEDEC registered values LB4S 400 280 400 LB6S 600 420 600 LB8S 800 560 800 0.8 10 30 0.95 5.0 500 85 25 -55 to +150 LB10S 1000 700...