LB2S Datasheet | Sunmate

Features D Low Profile: Typical height of 1.4mm D Ideal for automated placement D High surge current capability Mechanical Data D Case:SOPA-4 D Epoxy meets UL-94V-0 Flammability rating D Terminals:Matte tin plated ldads, solderable per D J-STD-002B and JESD22-B102D D Polarity:As markde on body SOPA-4 Maximum Ratings and Electrical Characteristics TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage VRRM VRMS VDC Maximum Average forward output rectified current on glass-eposy P.C.B IF(AV) on aluminum substrate LB2S 200 140 200 LB4S 400 280 400 LB6S 600 420 600 LB8S 800 560 800 Peak forward surge current 8.3 ms single sine-wave superimposed on rated load (JEDEC Method) IFSM Rating for fusig (t<8.3ms) I2t Maximum instantaneous forward voltage drop per diode at 0.4A Maximum DC reverse current at TA=25- IR rated DC blocking voltage per leg TA=125- RθJA Typical thermal resistance per leg (Note 1) RθJL Operating junction temperature range TJ Storage temperature range TSTG Notes1: . Device mounted P.C.B with 0.47x0.47''(12mmx12mm) Copper Pads. 2. JEDEC registered values 5 500 80 25 -55 to +150 -55 to +150 LB10S 1000 800 1000 Unit V V V A...