FP6606 Datasheet | Fitipower

Description FP6606 is a USB PD PHY that enables a USB Type-C port with the Configuration Channel (CC) logic needed for USB Type-C ecosystems. It integrates the physical layer of the USB BMC power delivery (PD) protocol to allow up to 100W of power and support for alternate mode interfaces. An external microprocessor, containing USB Type-C Port Manager (TCPM), municates with the FP6606 through an I2C interface. Under control of the TCPM, FP6606 uses the CC pins to determine port attach/detach, cable orientation, role detection, and port control for USB Type-C current mode. The FP6606 can be configured as DFP, UFP, or DRP, depending on the application. The FP6606 implements VBUS detection and discharge for the implementation of a pliant USB Type-C port. The FP6606 integrates 100m W switch to provide VCONN power for E-mark cable and provides VCONN discharge function. The FP6606 also supports USB Type-C optional features such as audio and debug accessory mode. Additionally, the FP6606 integrates Hi Silicon Fast Charging Protocol (FCP) and Qualm® Quick Charge TM 2.0/3.0 (QC 2.0/3.0) USB interface. The FP6606 monitors USB D+/D- data line and automatically adjusts the output voltage depending on different powered device. If the powered device doesn’t support USB PD protocol, the FP6606 can support other protocol as mentioned above. The FP6606 is available in TQFN-24 and TQFN-16 packages. Features USB Type-C: - Supports USB Type-C™ 1.2 and TCPCI 1.2 - 5V-24 V Power Sourcing and Sinking - 100m W VCONN Power (20m A) - Optimized for Portable Applications with Autonomous Dual Role Port (DRP) Support - TCPM Configures as : - Source, Sink and DRP mode - Attach/Detach of USB port - Cable Orientation Detection - Current Mode Advertisement and Detection - Debug and Audio Accessory Support - Dead Battery Support (Optional) - VBUS and VCONN Discharge Function - Support Type-C DRP Try.SRC or Try.SNK USB PD: - USB Power Delivery 2.0/ 3.0 Specifications - Fast Role Swap Support - Data...