Datasheet4U Logo Datasheet4U.com

33289 - Dual High-Side Switch

Datasheet Summary

Description

Pin Number 1, 2, 5, 6, 15, 16, 19, 20 Pin Name VBAT Pin Function Supply Voltage Definition These are the power supply pins of the device.

These pins are directly connected with the lead frame of the package and are tied to the drain of the switching MOSFET.

Features

  • Designed to drive Automotive Inductive loads Operating Voltage Range from 6.0 V to 27 V Maximum Breakdown Voltage greater than 40 V 40 mΩ RDSON at 25°C Overtemperature Protection with Hysteresis Overcurrent protection Under Voltage Shutdown Over Voltage Shutdown Open Load Detection in Off-State Independent Diagnostic Output ESD Protection 2.0 kV Standby Current less than 5.0 µA.

📥 Download Datasheet

Datasheet preview – 33289

Datasheet Details

Part number 33289
Manufacturer Freescale Semiconductor
File Size 526.96 KB
Description Dual High-Side Switch
Datasheet download datasheet 33289 Datasheet
Additional preview pages of the 33289 datasheet.

📁 Similar Datasheet

  • 3329 - 66-channel GPS Engine Board Antenna Module (Mediatek_3329)
  • 3329 - Trimming Potentiometer (BOURNS)
  • 3329H - 6.8 X 4.7 Circularity/ Single Turn /Trimming Potentiometer (DB Lectro)
  • 3329H - Trimming Potentiometer (BOURNS)
  • 3329P - Trimming Potentiometer (BOURNS)
  • 3329S - Circularity/ Single Turn /Trimming Potentiometer (DB Lectro)
  • 3329S - Trimming Potentiometer (BOURNS)
  • 3329W - Trimming Potentiometer (BOURNS)
  • 3329X - Circularity/ Single Turn /Trimming Potentiometer (DB Lectro)
Other Datasheets by Freescale Semiconductor
  • 33285 - Dual High-Side TMOS Driver
  • 33287 - Contact Monitoring and Dual Low-Side Protected Driver
  • 33288 - Solid State Relay
  • 33291 - Eight-Output Switch
  • 33291L - Eight-Output Switch

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Freescale Semiconductor Advance Information Document Number: MC33289 Rev. 4.0, 6/2006 Dual High-Side Switch 40 mΩ The 33289 is a Dual High Side Switch (DHSS) dedicated for use in automotive applications. It is designed to drive typical inductive loads such as solenoid valves. This device consists of two independent 40 mΩ RDSON MOSFET channels plus corresponding control circuitry in a surface mount package. The 33289 can be interfaced directly to a microcontroller for input control and monitoring of diagnostic output. Each switch offers independent protection and diagnosis during overcurrent, overvoltage, and undervoltage conditions, as well as an overtemperature shutdown feature.
Published: |