Datasheet4U Logo Datasheet4U.com

56F8036 - 16-bit Digital Signal Controllers

General Description

of the TMS signal in Table 2-3: Note: Always tie the TMS pin to VDD through a 2.2K resistor.

Please see http://www.freescale.com for the most current Data Sheet revision.

56F8036 Data Sheet, Rev.

U

Key Features

  • . 5 56F8036.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
56F803 16-bit Hybrid Controller Motorola
56F8033 16-bit Digital Signal Controllers Motorola Semiconductor
56F8035 16-bit Digital Signal Controllers Motorola Semiconductor
56F801 16-bit Hybrid Controller Motorola
56F8011 (56F8011 / 56F8013) 16-Bit Digital Signal Controller Motorola Semiconductor

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
56F803 16-bit Digital Signal Controllers
56F8037 16-bit Digital Signal Controllers
56F800 16-bit Digital Signal Controllers
56F801 16-bit Digital Signal Controllers
56F8013 16-bit Digital Signal Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 56F8036 Data Sheet Preliminary Technical Data 56F8000 16-bit Digital Signal Controllers MC56F8036 Rev. 3 01/2007 freescale.com Document Revision History Version History Rev. 0 Rev. 1 Initial public release. • In Table 10-4, added an entry for flash data retention with less than 100 program/erase cycles (minimum 20 years). • In Table 10-6, changed the device clock speed in STOP mode from 8MHz to 4MHz. • In Table 10-12, changed the typical relaxation oscillator output frequency in Standby mode from 400kHz to 200kHz. • Changed input propagation delay values in Table 10-21 as follows: Old values: 1 μs typical, 2 μs maximum New values: 35 ns typical, 45 ns maximum Rev. 2 Rev. 3 In Table 10-20, changed the maximum ADC internal clock frequency from 8MHz to 5.33MHz.