Datasheet4U Logo Datasheet4U.com

56F8037 - 16-bit Digital Signal Controllers

Download the 56F8037 datasheet PDF. This datasheet also covers the 56F8027 variant, as both devices belong to the same 16-bit digital signal controllers family and are provided as variant models within a single manufacturer datasheet.

General Description

of the TMS signal in Table 2-3: Note: Always tie the TMS pin to VDD through a 2.2K resistor.

Changed the description of the GPIOC4 signal in Table 2-3 (was “the signal goes to both the ANA0 and CMPAI3”, is “the signal goes to both ANB0 and CMPB13”).

Rev.

Changed the ITCN_BASE a

Key Features

  • Added information for 56F8027 device throughout document.
  • Fixed miscellaneous typos.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (56F8027_FreescaleSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
56F803 16-bit Hybrid Controller Motorola
56F8033 16-bit Digital Signal Controllers Motorola Semiconductor
56F8035 16-bit Digital Signal Controllers Motorola Semiconductor
56F801 16-bit Hybrid Controller Motorola
56F8011 (56F8011 / 56F8013) 16-Bit Digital Signal Controller Motorola Semiconductor

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
56F803 16-bit Digital Signal Controllers
56F8036 16-bit Digital Signal Controllers
56F800 16-bit Digital Signal Controllers
56F801 16-bit Digital Signal Controllers
56F8013 16-bit Digital Signal Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 56F8037/56F8027 Data Sheet Technical Data 56F8000 16-bit Digital Signal Controllers MC56F8037 Rev. 6 02/2010 freescale.com www.DataSheet4U.com Document Revision History Version History Rev. 0 Rev. 1 Initial public release. • In Table 10-4, added an entry for flash data retention with less than 100 program/erase cycles (minimum 20 years). • In Table 10-6, changed the device clock speed in STOP mode from 8MHz to 4MHz. • In Table 10-12, changed the typical relaxation oscillator output frequency in Standby mode from 400kHz to 200kHz. • Changed input propagation delay values in Table 10-21 as follows: Old values: 1 μs typical, 2 μs maximum New values: 35 ns typical, 45 ns maximum Rev. 2 Rev.