Datasheet4U Logo Datasheet4U.com

MC10XSC425 - Quad High Side Switch

General Description

.

.

Key Features

  • Four protected 10 m and 25 m high side switches (at 25 °C).
  • Operating voltage range of 6.0 to 20 V with sleep current  < 5.0 A, extended mode from 4.0 to 28 V.
  • 8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting with daisy chain capability.
  • PWM module using external clock or calibratable internal oscillator with programmable output delay management.
  • Smart overcurrent shutdown, severe short-circuit, overtemperature protections with tim.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC10XS4200 Dual 24V 10mOhm high-side switch NXP
MC1001 (MC1002 / MC1003) 6 input Gates Motorola
MC1002 6 SEGMENT x 7 GRID LED Driver ABOV
MC100E016 8-BIT SYNCHRONOUS BINARY UP COUNTER ON Semiconductor
MC100E016 8-Bit Synchronous Binary Up Counter Motorola

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
MC10XS3412 Quad High Side Switch
MC10XS3435 Quad High Side Switch
MC10XS3535 Smart Front Corner Light Switch
MC10XS4200 10 mOhm High Side Switch
MC10XSD200 Dual 10 mOhm High Side Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor Advance Information Document Number: MC10XSC425 Rev. 2.0, 9/2013 Quad High Side Switch  (Dual 10 mOhm, Dual 25 mOhm) The 10XSC425 is one in a family of devices designed for low-voltage lighting or factory automation applications. Its four low RDS(ON) MOSFETs (dual 10 m/dual 25 m) can control four separate 55 W / 28 W bulbs, and/or Xenon modules, and/or LEDs, and/or DC low voltage motors. Programming, control and diagnostics are accomplished using a 16-bit SPI interface. Its output with selectable slew-rate improves electromagnetic compatibility (EMC) behavior. Additionally, each output has its own parallel input or SPI control for pulse-width modulation (PWM) control if desired.