Datasheet4U Logo Datasheet4U.com

MC33927 - Three-Phase Field Effect Transistor Pre-Driver

General Description

of each pin can be found in the Functional Pin Description section beginning on page 20.

Power Dri

Key Features

  • Fully specified from 8.0V to 40V covers 12V and 24V automotive systems.
  • Extended operating range from 6.0V to 58V covers 12V and 42V systems.
  • 1.0A gate drive capability with protection.
  • Protection against reverse charge injection from CGD and CGS of external FETs.
  • Includes a charge pump to support full FET drive at low battery voltages.
  • Deadtime is programmable via the SPI port.
  • Simultaneous output capability enabled via safe SPI co.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC3392 LOW SIDE PROTECTED SWITCH Motorola
MC33926 5.0A throttle control H-bridge NXP
MC33902 High Speed CAN Interface Motorola
MC33903 SBC Gen2 NXP
MC33904 SBC Gen2 NXP

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
MC33926 5.0A Throttle Control H-Bridge
MC33901 High-speed CAN Transceiver
MC33912 LIN transceiver
MC33931 5.0A Throttle Control H-bridge
MC33932 5.0A Throttle Control H-Bridge

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor Advance Information Document Number: MC33927 Rev. 2.0, 8/2007 Three-Phase Field Effect Transistor Pre-Driver The 33927 is a Field Effect Transistor (FET) pre-driver designed for three-phase motor control and similar applications. The integrated circuit (IC) uses SMARTMOS™ technology. The IC contains three high-side FET pre-drivers and three low-side FET pre-drivers.Three external bootstrap capacitors provide gate charge to the high side FETs. The IC interfaces to a MCU via six direct input control signals, a SPI port for device setup and asynchronous reset, enable and interrupt signals. Both 5.0V and 3.0V logic level inputs are accepted and 5.0V logic level outputs are provided. www.DataSheet4U.com Features • Fully specified from 8.