MC9S08QB4
MC9S08QB4 is Microcontrollers manufactured by Freescale Semiconductor.
- Part of the MC9S08QB8 comparator family.
- Part of the MC9S08QB8 comparator family.
Features
8-Bit HCS08 Central Processor Unit (CPU)
- Up to 20 MHz CPU at 3.6 V to 1.8 V across temperature range of
- 40 °C to 85 °C
- HC08 instruction set with added BGND instruction
- Support for up to 32 interrupt/reset sources
On-Chip Memory
- Up to 8 KB flash memory read/program/erase over full operating voltage and temperature
- Up to 512 bytes random-access memory (RAM)
- Security circuitry to prevent unauthorized access to RAM and flash contents
Power-Saving Modes
- Two very low power stop modes
- Low power run and low power wait modes
- Peripheral clock enable register can disable clocks to unused modules, thereby reducing currents
- Very low power external oscillator that can be used in stop2 or stop3 modes to provide accurate clock source to real time counter
- 6 μs typical wakeup time from stop3 mode
Clock Source Options
- Oscillator (XOSC)
- Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 k Hz to 38.4 k Hz or 1 MHz to 16 MHz
- Internal Clock Source (ICS)
- Internal clock source module containing a frequency-locked-loop (FLL) controlled by internal reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supports bus frequencies from 1 MHz to 10 MHz
System Protection
- Watchdog puter operating properly (COP) reset with option to run from dedicated 1 k Hz internal clock source or bus clock
- Low-voltage detection with reset or interrupt; selectable trip points
- Illegal opcode detection with reset
- Illegal address detection with reset
- Flash block protection
Development Support
- Single-wire background debug interface
- Breakpoint capability to allow single breakpoint setting during in-circuit debugging
Peripherals
- ADC
- 8-channel, 12-bit resolution; 2.5 μs conversion time; automatic pare function; 1.7 m V/°C temperature sensor; internal bandgap reference channel; operation in stop3; fully functional from 3.6 V to 1.8 V.
- ACMP
- Analog parator with selectable...