Datasheet4U Logo Datasheet4U.com

MCZ33797 - Four Channel Squib Driver IC

General Description

Table 1.

Key Features

  • are incorporated to provide fail-safe operation. The device contains a serial peripheral interface (SPI) compatible 8-bit interface to allow microprocessor control. The device has the capability to be used in a standard four-channel squib driver IC or in a cross-coupled state with the high- and low-side squib drivers located on separate squib driver ICs. Both the high- and low-side output drivers are protected against temporary shorts to battery or ground. The current limit threshold is set by a.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MCZ3001D Audio Power Supply ETC
MCZ34670 IEEE 802.3af PD Motorola Semiconductor
MCZ0605AH EMC Components TDK
MCZ1210CH EMC Components TDK
MCZ1210DH EMC Components TDK

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
MCZ33790 Two-Channel Distributed System Interface (DSI) Physical Interface Device
MCZ33793 Distributed System Interface (DSI) Sensor Interface
MCZ33793A Distributed System Interface (DSI) Sensor Interface
MCZ33742 System Basis Chip
MCZ33742S System Basis Chip

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Freescale Semiconductor Advance Information Document Number: MC33797 Rev 3.0, 11/2006 Four Channel Squib Driver IC The Four Channel Squib Driver IC is a complete squib diagnostic and deployment interface for use in automotive air bag modules. Extensive diagnostics and system control features are incorporated to provide fail-safe operation. The device contains a serial peripheral interface (SPI) compatible 8-bit interface to allow microprocessor control. The device has the capability to be used in a standard four-channel squib driver IC or in a cross-coupled state with the high- and low-side squib drivers located on separate squib driver ICs. Both the high- and low-side output drivers are protected against temporary shorts to battery or ground.