MCZ33880 Datasheet | Freescale Semiconductor

features include very low standby currents, “cascadable” fault reporting, internal 40 V output clamping for low-side configurations, internal -20 V output clamping for high-side configurations, output-specific diagnostics, and independent shutdown of outputs. Features - Designed to Operate 5.5 V < VPWR < 24.5 V - 8-Bit SPI for Control and Fault Reporting, 3.3 V/ 5.0 V patible - Outputs Are Current Limited (0.8 A to 2.0 A) to Drive Incandescent Lamps - Output Voltage Clamp Is +45 V (Typical) (Low-Side Drive) and 20 V (Typical) (High-Side Drive) During Inductive Switching - Internal Reverse Battery Protection on VPWR - Loss of Ground or Supply Will Not Energize Loads or Damage IC - Maximum 5.0 µA IPWR Standby Current at 13 V VPWR up to 95°C - RDS(ON) of 0.55 Ω at 25°C Typical - Short Circuit Detect and Current Limit with Automatic Retry - Independent Overtemperature Protection - 32-Pin SOICW Has Pins 8, 9, 24, and 25 Grounded for Thermal Performance - Pb-Free Packaging Designated by Suffix Code EG and EW V PWR 5.0 V 5.0 V HIGH/LOW-SIDE SWITCH DW SUFFIX EG SUFFIX (PB-FREE) 98ASB42345B 28-PIN SOICW DWB SUFFIX EW SUFFIX (PB-FREE) 98ARH99137A 32-PIN SOICW ORDERING INFORMATION Device MC33880DW/R2 MCZ33880EG/R2 MC33880DWB/R2 MCZ33880EW/R2 28 SOICW -40°C to 125°C 32 SOICW Temperature Range (TA) Package .. VPWR VDD D1 D2 D3 D4 D5 D6 D7 D8 S1 S2 S3 S4 S5 S6 S7 S8 VS High-Side EN MCU SPI I/O CS SCLK DI DO IN5 IN6 GND H-Bridge Low-Side All Output Switches are High- or Low-Side Configurable Figure 1. 33880 Simplified Application Diagram - This document contains certain information on a new product. Specifications and information herein are subject to change without notice. © Freescale Semiconductor, Inc., 2007. All rights reserved. INTERNAL BLOCK DIAGRAM INTERNAL BLOCK DIAGRAM VDD __ CS SCLK DI DO OV, POR, SLEEP ~50 µA VPWR Overvoltage Shutdown / POR Sleep State Internal...