Datasheet4U Logo Datasheet4U.com

MCZ33883 - H-Bridge Gate Driver IC

General Description

of each terminal can be found in the FUNCTIONAL TERMINAL DESCRIPTION section beginning on page 10.

Key Features

  • VCC Operating Voltage Range from 5.5 V up to 55 V VCC2 Operating Voltage Range from 5.5 V up to 28 V CMOS / LSTTL Compatible I / O 1.0 A Peak Gate Driver Current Built-In High-Side Charge Pump Undervoltage Lockout (UVLO) Overvoltage Lockout (OVLO) Global Enable with.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MCZ3001D Audio Power Supply ETC
MCZ34670 IEEE 802.3af PD Motorola Semiconductor
MCZ0605AH EMC Components TDK
MCZ1210CH EMC Components TDK
MCZ1210DH EMC Components TDK

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
MCZ33880 Configurable Octal Serial Switch
MCZ33884 Switch Monitor Interface
MCZ33887 5.0 A H-Bridge
MCZ33889 System Basis Chip
MCZ33800 Engine Control Integrated Circuit

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Freescale Semiconductor Advance Information Document Number: MC33883 Rev 9.0, 1/2007 H-Bridge Gate Driver IC The 33883 is an H-bridge gate driver (also known as a full-bridge pre-driver) IC with integrated charge pump and independent highand low-side gate driver channels. The gate driver channels are independently controlled by four separate input terminals, thus allowing the device to be optionally configured as two independent high-side gate drivers and two independent low-side gate drivers. The low-side channels are referenced to ground. The high-side channels are floating. The gate driver outputs can source and sink up to 1.