Datasheet4U Logo Datasheet4U.com

MBM29DL34BF - (MBM29DL34BF/TF) FLASH MEMORY CMOS 32 M (4 M X 8/2 M X 16) BIT

Description

The MBM29DL34TF/BF are a 32 M-bit, 3.0 V-only Flash memory organized as 4 M bytes of 8 bits each or 2 M words of 16 bits each.

These devices are designed to be programmed in-system with the standard system 3.0 V VCC supply.

12.0 V VPP and 5.0 V VCC are not required for write or erase operations.

Features

  • a sector erase architecture. The sector mode allows each sector to be erased and reprogrammed without affecting other sectors. The device is erased when shipped from the factory. The device features single 3.0 V power supply operation for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. A low VCC detector automatically inhibits write operations on the loss of power. The end of program or erase is detected by Data Pollin.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MBM29DL321BD-12 32M (4M x 8/2M x 16) BIT Dual Operation Fujitsu
MBM29DL321BD-80 32M (4M x 8/2M x 16) BIT Dual Operation Fujitsu
MBM29DL321BD-90 32M (4M x 8/2M x 16) BIT Dual Operation Fujitsu
MBM29DL321TD-12 32M (4M x 8/2M x 16) BIT Dual Operation Fujitsu
MBM29DL321TD-80 32M (4M x 8/2M x 16) BIT Dual Operation Fujitsu

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MBM29DL34TF (MBM29DL34BF/TF) FLASH MEMORY CMOS 32 M (4 M X 8/2 M X 16) BIT
MBM29DL321BD (MBM29DL32xBD) 32M (4M X 8/2M X 16) BIT Dual Operation
MBM29DL321TD (MBM29DL32xBD) 32M (4M X 8/2M X 16) BIT Dual Operation
MBM29DL322BD (MBM29DL32xBD) 32M (4M X 8/2M X 16) BIT Dual Operation
MBM29DL322BE (MBM29DL32xTE/BE) FLASH MEMORY CMOS 32 M (4 M X 8/2 M X 16) BIT

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20908-2E FLASH MEMORY CMOS 32 M (4 M × 8/2 M × 16) BIT Dual Operation MBM29DL34TF/BF 70 s DESCRIPTION The MBM29DL34TF/BF are a 32 M-bit, 3.0 V-only Flash memory organized as 4 M bytes of 8 bits each or 2 M words of 16 bits each. These devices are designed to be programmed in-system with the standard system 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. The devices can also be reprogrammed in standard EPROM programmers. (Continued) s PRODUCT LINE UP Part No. Power Supply Voltage (V) Max Address Access Time (ns) Max CE Access Time (ns) Max OE Access Time (ns) MBM29DL34TF/BF 70 2.7 V to 3.
Published: |