MBR2550CT Datasheet | Good-Ark Semiconductor

Features ‹ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ‹ Dual rectifier construction, positive center tap ‹ Metal silicon junction, majority carrier conduction ‹ Low power loss, high efficiency ‹ Guardring for overvoltage protection ‹ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ‹ High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case ‹ Rated for reverse surge and ESD .. ‹ Case: JEDEC TO-220AB, ITO-220AB molded plastic body ‹ Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 ‹ Polarity: As marked ‹ Mounting Position: Any ‹ Mounting Torque: 10 in-lbs maximum ‹ Weight: 0.08 ounce, 2.24 grams TO-220AB Mechanical Data ITO-220AB TO-263AB(D2PAK) Mounting Pad Layout TO-263AB Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics ( TC = 25o C unless otherwise noted ) Parameter Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=130o C Total device Per leg Symbol VRRM VRWM V DC IF(AV) IFRM IFSM IRRM dv/dt MBR2535CT 35 35 35 MBR2545CT 45 45 45 MBR2550CT 50 50 50 MBR2560CT 60 60 60 Unit Volts Volts Volts Amps Amps Amps 25 12.5 30 150 1.0 10,000 0.5 Peak repetitive forward current per leg (rated VR, sq. wave, 20KHz) at TC=130o C Peak forward surge current 8.3ms single half sine-wave .. superimposed on rated load (JEDEC Method) per leg Peak repetitive reverse surge current per leg at tp = 2.0us, 1KHz Voltage rate of change (rated VR) Maximum instantaneous forward voltage per leg (Note 4) at IF=12.5A, TC=25o C at IF=12.5A, TC=125o C at IF=25A, TC=25o C at IF=25A, TC=125o C Maximum instantaneous reverse current at rated DC blocking voltage per leg (Note 4) TC=25o C TC=125o C Amp V/us VF 0.82 0.73 0.2 IR 40 RθJC VISOL TJ TSTG 0.75 0.65 1.0 m A 50 o Volt Typical thermal resistance from junction to case per leg RMS...