Datasheet4U Logo Datasheet4U.com

GS88436B - S/DCD Sync Burst SRAMs

This page provides the datasheet information for the GS88436B, a member of the GS88418B S/DCD Sync Burst SRAMs family.

Description

The GS88418/36B is a 9,437,184-bit high performance synchronous SRAM with a 2-bit burst address counter.

Features

  • FT pin for user-configurable flow through or pipelined operation.
  • Single/Dual Cycle Deselect Selectable.
  • ZQ mode pin for user-selectable high/low output drive strength.
  • 3.3 V +10%/.
  • 5% core power supply.
  • 2.5 V or 3.3 V I/O supply.
  • LBO pin for Linear or Interleaved Burst mode.
  • Internal input resistors on mode pins allow floating mode pins.
  • Default to SCD x18/x36 Interleaved Pipeline mode.
  • Byte Write (BW) and/.

📥 Download Datasheet

Datasheet preview – GS88436B

Datasheet Details

Part number GS88436B
Manufacturer GSI Technology
File Size 637.23 KB
Description S/DCD Sync Burst SRAMs
Datasheet download datasheet GS88436B Datasheet
Additional preview pages of the GS88436B datasheet.

📁 Similar Datasheet

  • GS88018AT-133 - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-133I - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-150 - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-150I - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-166 - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-166I - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-200 - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-200I - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-225 - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
  • GS88018AT-225I - 512K x 18/ 256K x 32/ 256K x 36 9Mb Sync Burst SRAMs (ETC)
Other Datasheets by GSI Technology

Full PDF Text Transcription

Click to expand full text
Preliminary GS88418/36B-200/180/166/150/133 119-Bump BGA www.DataSheet4U.com Commercial Temp Industrial Temp Features • FT pin for user-configurable flow through or pipelined operation • Single/Dual Cycle Deselect Selectable • ZQ mode pin for user-selectable high/low output drive strength • 3.3 V +10%/–5% core power supply • 2.5 V or 3.
Published: |