GU1117A Datasheet | GTM

.. ISSUED DATE :2005/07/22 REVISED DATE :2006/06/01B G U 111 7 A 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator The GU1117A is a low dropout at positive adjustable or fixed-mode regulator with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. GU1117A is also well suited for other applications such as VGA cards. GU1117A is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 12V input supply. Description Features 1.4Vmaximum dropout full load current Fast transient response Output current limiting Built-in thermal shutdown Good noise rejection 3-Terminal Adjustable or Fixed 1.5V,1.8V,2.5V,3.3V,5.0V Package Dimensions REF. A b L4 c L3 L1 E Millimeter REF. Min. Max. 4.40 4.80 c2 0.76 1.00 b2 0.00 0.30 B D 0.36 0.5 e 1.50 REF. L 2.29 2.79 9.80 10.4 L2 Millimeter Min. Max. 1.25 1.45 1.17 1.47 8.6 9.0 2.54 REF. 14.6 15.8 0˚ 8˚ 1.27 REF. Typical Circuit Page: 1/4 ISSUED DATE :2005/07/22 REVISED DATE :2006/06/01B Block Diagram Pin Descriptions Name Adj (GND) Vout Vin O I I/O Pin# 1 2 3 Function A resistor divider from this pin to the Vout pin and ground sets the output voltage (Ground only for fixed mode) The output of the regulator. A minimum of 10u F capacitor must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than Vout in order for the device to regulate...