BY229X Datasheet | General Semiconductor

FEATURES - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 - Glass passivated chip junction - Low leakage, high voltage - High surge current capability - Superfast recovery time, for high efficiency - High temperature soldering guaranteed: 250°C, 0.25" (6.35mm) from case for 10 seconds 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) 0.600 (15.5) 0.580 (14.5) 0.676 (17.2) 0.646 (16.4) 0.350 (8.89) 0.330 (8.38) PIN 1 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) 0.110 (2.80) 0.100 (2.54) MECHANICAL DATA Case: JEDEC ITO-220AC fully overmolded plastic body over passivated chip Terminals: Plated lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight: 0.064 ounce, 1.81 grams Mounting Torque: 5 in. - lbs. max. 0.037 (0.94) 0.027 (0.69) 0.205 (5.20) 0.195 (4.95) PIN 1 PIN 2 0.022 (0.55) 0.014 (0.36) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS BY229X -200 BY229X -400 BY229X -600 BY229X -800 UNITS Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 20A Maximum DC reverse current at rated DC blocking voltage TJ=25°C at TJ=125°C VRRM VRMS VDC I(AV) 200 140 200 400 280 400 8.0 600 420 600 800 560 800 Volts Volts Volts Amps IFSM VF IR trr Qrr dir/dt RΘJC RΘJA TJ, TSTG VISOL 100 1.85 10.0 300 145 700 60 4.8 20 -40 to +150 4500 (NOTE 4) 3500 (NOTE 5) 1500 (NOTE 6) Amps Volts µA ns n C A/µs °C/W °C/W °C Volts Maximum reverse recovery time (NOTE 1) Maximum recovered stored charge (NOTE 2) Maximum slope of reverse recovery current (NOTE 2)...