Datasheet4U Logo Datasheet4U.com

GS9028 - Cable Driver

Description

The GS9028 is a second generation bipolar integrated circuit designed to drive two 75Ω co-axial cables.

Features

  • SMPTE 259M compliant.
  • Two complementary outputs, adjustable from 50 to 1000mVp-p into 75Ω loads.
  • Operational from DC to 622Mb/s.
  • Nominal 470ps rise and fall times.
  • < ±7% output amplitude control.
  • 45% system power reduction over the GS9008.
  • No external pulldown resistors required.
  • Input hysteresis.
  • Operational down to 80mV input amplitude.
  • Operates from a single +5 or -5 volt supply.
  • 8-pin SOIC.

📥 Download Datasheet

Datasheet preview – GS9028

Datasheet Details

Part number GS9028
Manufacturer Gennum
File Size 815.55 KB
Description Cable Driver
Datasheet download datasheet GS9028 Datasheet
Additional preview pages of the GS9028 datasheet.

📁 Similar Datasheet

  • GS9020 - 2A Sink/Source Bus Termination Regulator (Globaltech)
  • GS9015 - Small Signal Transistors (Vishay)
  • GS9065A - HD-LINX-R II Multi-Rate SDI Automatic Reclocker (Gennum Corporation)
  • GS9068A - HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver (Gennum Corporation)
  • GS9075A - HD-LINX-R II Multi-Rate SDI Automatic Reclocker (Gennum Corporation)
  • GS9090 - GenLINX-R III 270Mb/s Deserializer (Gennum Corporation)
  • GS9090A - GenLINX-R III 270Mb/s Deserializer (Gennum Corporation)
  • GS9090B - GenLINX III 270Mb/s Deserializer (Gennum Corporation)
  • GS9091B - 270Mb/s Deserializer (Semtech)
  • GS9092 - GenLINX-R III 270Mb/s Serializer (Gennum Corporation)
Other Datasheets by Gennum
  • GS9020A - Serial Digital Video Input Processor
  • GS9022 - Digital Video Serializer
  • GS9023 - Embedded Audio CODEC
  • GS9024 - Automatic Cable Equalizer
  • GS9025A - Serial Digital Receiver
  • GS9029 - Serial Digital Video Cable Driver
  • GS9000 - Serial Digital Decoder
  • GS9000C - Serial Digital Decoder

Full PDF Text Transcription

Click to expand full text
GS9028 GENLINX™ II Cable Driver with Two Adjustable Outputs Features • SMPTE 259M compliant • Two complementary outputs, adjustable from 50 to 1000mVp-p into 75Ω loads • Operational from DC to 622Mb/s • Nominal 470ps rise and fall times • < ±7% output amplitude control • 45% system power reduction over the GS9008 • No external pulldown resistors required • Input hysteresis • Operational down to 80mV input amplitude • Operates from a single +5 or -5 volt supply • 8-pin SOIC • Pb-free and Green Applications • 4ƒsc, 4:2:2, and 4:4:4:4 serial digital video interfaces from 143Mb/s to 540Mb/s; general purpose high-speed cable driver applications. Description The GS9028 is a second generation bipolar integrated circuit designed to drive two 75Ω co-axial cables.
Published: |