GS9029 - Serial Digital Video Cable Driver

Product Overview

Gennum

Part number	GS9029
Manufacturer	Gennum
File Size	125.82 KB
Description	Serial Digital Video Cable Driver
Datasheet	GS9029 Datasheet
Additional preview pages of the GS9029 datasheet.

DATA SHEET The GS9029 is a second generation bipolar integrated circuit designed to drive four 75Ω co-axial cables.The GS9029

SMPTE 259M compliant.
four isolated outputs (two complimentary pairs), adjustable from 50mV-1000mV into 75Ω loads.
operational from 143Mb/s to 540Mb/s and beyond.
nominal 500ps rise/fall times.
precise ±7.5% output amplitudes.
40% system power reduction over GS9007.
75Ω on-chip input termination resistors.
input hysteresis.
operational down to 80mV input amplitude.
superior output isolation.
"Bus.

📁 Similar Datasheet

GS9020 - 2A Sink/Source Bus Termination Regulator (Globaltech)
GS9020A - Serial Digital Video Input Processor (GENNUM)
GS9023 - Embedded Audio CODEC (GENNUM)
GS9025A - Serial Digital Receiver (GENNUM)
GS9015 - Small Signal Transistors (Vishay)
GS9065A - HD-LINX-R II Multi-Rate SDI Automatic Reclocker (Gennum Corporation)
GS9068A - HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver (Gennum Corporation)
GS9075A - HD-LINX-R II Multi-Rate SDI Automatic Reclocker (Gennum Corporation)

Other Datasheets by Gennum

Published: Apr 21, 2019 |