Datasheet4U Logo Datasheet4U.com

HM5228 - Dual SPDT Negative Signal Handing Analog Switch

General Description

The HM5228 is an advanced CMOS analog switch fabricated in Sub

micron silicon gate CMOS technology.

Key Features

  • guaranteed Break Before Make (BBM) switching, assuring the switches never short the driver. The switches can handle negative signal down to -2V. Features z Low RON: typical 0.5Ω @ VCC =5V z Single Supply Operation from 2.5V.
  • 5V z Full -2V.
  • VCC Signal Handling Capability z High Off.
  • Channel Isolation z Low Standby Current z Low Distortion z Break-Before-Make(BBM) switching z High Continuous Current Capability: ±300 mA Through Each Switch z.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HM5225165B-75 256M LVTTL interface SDRAM 133 MHz/100 MHz 4-Mword 16-bit 4-bank/8-Mword 8-bit 4-bank /16-Mword 4-bit 4-bank PC/133/ PC/100 SDRAM Elpida Memory
HM5225165B-A6 256M LVTTL interface SDRAM 133 MHz/100 MHz 4-Mword 16-bit 4-bank/8-Mword 8-bit 4-bank /16-Mword 4-bit 4-bank PC/133/ PC/100 SDRAM Elpida Memory
HM5225165B-B6 256M LVTTL interface SDRAM 133 MHz/100 MHz 4-Mword 16-bit 4-bank/8-Mword 8-bit 4-bank /16-Mword 4-bit 4-bank PC/133/ PC/100 SDRAM Elpida Memory
HM5225325F-B60 256M LVTTL interface SDRAM 100 MHz 1-Mword x 64-bit x 4-bank/2-Mword x 32-bit x 4-bank PC/100 SDRAM Hitachi Semiconductor
HM5225405B-75 256M LVTTL interface SDRAM 133 MHz/100 MHz 4-Mword 16-bit 4-bank/8-Mword 8-bit 4-bank /16-Mword 4-bit 4-bank PC/133/ PC/100 SDRAM Elpida Memory

Other Datasheets by H&M Semiconductor

Part Number Description
HM5223 Dual SPDT Analog Switch
HM5264 Headphone wire controller
HM50N06K N-Channel Enhancement Mode Power MOSFET
HM50P03 P-Channel MOSFET
HM5183 High-Voltage Low-Power Synchronous BOOST Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
 HM 0.5Ω Dual SPDT Negative Signal Handing Analog Switch General Description The HM5228 is an advanced CMOS analog switch fabricated in Sub−micron silicon gate CMOS technology. The part also features guaranteed Break Before Make (BBM) switching, assuring the switches never short the driver. The switches can handle negative signal down to -2V. Features z Low RON: typical 0.5Ω @ VCC =5V z Single Supply Operation from 2.5V−5V z Full -2V−VCC Signal Handling Capability z High Off−Channel Isolation z Low Standby Current z Low Distortion z Break-Before-Make(BBM) switching z High Continuous Current Capability: ±300 mA Through Each Switch z Applications in Cell Phone Audio Block/ Speaker and Earphone Switching Ring−Tone Chip / Amplifier Switching/Modems z Package :QFN10L(1.8*1.