HVI100 Datasheet | HITRON ELECTRONICS

FEATURES : AUTO-RANGING ACMODATE AC SOURCES BOX OR L-BRACKET FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING PLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Auto-ranging 115(90-132) Vac and 230(180-264) VAC. Transient threshold 150Vac typical. (Option for dual input selectable) Input Connector: See Pin assignment. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A@115Vac, 40A@230Vac. Input Current: 2.5A @115Vac, 1.1A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. .. Hold-up Time: Typ. 22m S @115Vac, 27m S @230Vac. Earth leakage: Typ. 0.5m A @230Vac. Power Fail Signal: Installed. Logic Inhibit: Optional in HIH100-1X and HVI100-2X dual output series. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 100 watts. Output Connector: See pin assignment. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1.0%. Aux. VO2 typ. ±2.0%. (Magnetic Amp.) Aux. VO2 typ. ±5.0%. (Stacked-on.) Aux. VO3/VO4 typ. ±1.5%. (P.R.) Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main VO1. Adjustability: Available at VO1 & VO2. Remote Sense: Optional in HIH100 & HVI100-2X. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 75%. Switching Frequency: Fixed-frequency at 100K Hz. Circuit Topology: Fixed-frequency forward circuit. Transient Response: Output voltage returns in less than 3ms following a 25% load change. Safety Standard: UL 60950-1/EN 60950-1 Class I. Power Density: 1.56Watts / Cubic Inch. Operating Temperature: 0 to +50°C under forced air flow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Remended 20cfm cooling fan for full rating load. Construction: Enclosure box or L-bracket format. Note: Due to requests...