HVI102 Datasheet | HITRON ELECTRONICS

FEATURES : ACMODATE UNIVERSAL AC SOURCES LOW-PROFILE U-BRACKET FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING PLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: V-M connector. Input Frequency: 47-63Hz. Inrush Current: ≤30.6A peak @230Vac. Input Current: Typ. 1.8A @115Vac, 0.8A @230Vac. Dielectric Withstand: .. Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 11m S @115Vac, 60m S @ 230Vac. Power Fail Signal: Installed. Earth Leakage: Less than 0.4m A @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: V-M connector. Output Wattage: Typ. 100 watts. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2%. Aux.VO2/VO3/VO4 typ. ± 3-5% (mon choke). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output. UVP: Built-in at main output. Remote Sensing: Installed in main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Operating Temperature: 0 to +50 °C under forced air flow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04%/°C. Cooling: At least 25 cfm direct forward air flow is required to achieve full rating power. Construction: U-bracket format. GENERAL SPECIFICATION Efficiency: Typ. 80-82%. Switching Frequency: 63K Hz. Circuit Topology: Fixed frequency forward circuit. Transient Response: Output voltage returns in less than 3m S following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 4.10Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -29- OUTPUT VOLTAGE...