Datasheet4U Logo Datasheet4U.com

KLT1A20DC24 - Relays

Download the KLT1A20DC24 datasheet PDF. This datasheet also covers the KLT1A variant, as both devices belong to the same relays family and are provided as variant models within a single manufacturer datasheet.

Description

Input supply voltage, Connect a 1µF ceramic capacitor to power ground.

Charge-current programing and monitoring pin.

24000 I OUT = ---------------R ISET ( mA ) (EQ.

Features

  • include an OVP protected power-good source, preconditioning of an over-discharged battery, an NTC thermistor interface for charging the battery in a safe temperature range, automatic recharge, and thermally enhanced QFN package. Features.
  • Complete Charger for Single-Cell Li-ion/Polymer Batteries.
  • Integrated Pass Element and Current Sensor.
  • No External Blocking Diode Required.
  • Low Component Count and Cost.
  • 0.7% Voltage Accuracy.
  • Programmable.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (KLT1A-6DC5.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number KLT1A20DC24
Manufacturer Hasco
File Size 250.29 KB
Description Relays
Datasheet download datasheet KLT1A20DC24 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
KLT15F KLT SERIES SPECIFICATIONS ETC
KLT30F KLT SERIES SPECIFICATIONS ETC

Other Datasheets by Hasco

Part Number Description
KLT1A20DC12 Relays
KLT1A20DC18 Relays
KLT1A20DC48 Relays
KLT1A20DC5 Relays
KLT1A20DC6 Relays

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® ISL9219 Data Sheet April 7, 2010 FN6606.2 Li-ion Battery Charger The ISL9219 is a fully integrated high input voltage single-cell Li-ion battery charger. This charger is fully in compliance with the USB electrical specification. The charger performs the CC/CV charge function required by Li-ion batteries. The charger accepts an input voltage up to 28V but is disabled when the input voltage exceeds the OVP threshold, typically 6V, to prevent excessive power dissipation. The 28V rating eliminates the overvoltage protection circuit required in a low input voltage charger. The fast charge current is programmable with an external resistor, and the end-of-charge (EOC) current is fixed at 50mA for any input source type.
Published: |