Datasheet4U Logo Datasheet4U.com

HD74LVC16241 - 16-bit Buffers / Line Drivers with 3-state Outputs

General Description

The HD74LVC16241 has sixteen buffer drivers with three state outputs in a 48 pin package.

This device is a non inverting buffer and has two active low enables (1G , 4G ), high enables (2G, 3G).

Each enable independently controls four buffers.

Key Features

  • VCC = 2.0 V to 5.5 V All inputs VIH (Max. ) = 5.5 V (@VCC = 0 V to 5.5 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.0 V to 5.5 V) Function Table Inputs G H L L H: L: X: Z: High level Low level Immaterial High impedance G L H H A X H L Output Y Z H L HD74LVC16241 Pin Arrangement 1G 1 1Y1 2 1Y2 3 GND 4 1Y3 5 1Y4 6 VCC 7 2Y1 8 2Y2 9 GND.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74LVC16240A 16-bit Buffers / Line Drivers Renesas
HD74LVC16245A 16-bit Bus Transceivers Renesas
HD74LVC16373A 16-bit D-type Transparent Latches Renesas
HD74LVC16374A 16-bit D-type Flip Flops Renesas
HD74LVC125A Quad. Bus Buffer Gates Renesas

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HD74LVC16240A 16-bit Buffers / Line Drivers with 3-state Outputs
HD74lVC16244A 16-bit Buffers / Line Drivers with 3-state Outputs
HD74LVC16245A 16-bit Bus Transceivers with 3-state Outputs
HD74LVC16373A 16-bit D-type Transparent Latches with 3-state Outputs
HD74LVC16374A 16-bit D-type Flip Flops with 3-state Outputs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74LVC16241 16-bit Buffers / Line Drivers with 3-state Outputs ADE-205-073B(Z) 3rd Edition November 1995 Description The HD74LVC16241 has sixteen buffer drivers with three state outputs in a 48 pin package. This device is a non inverting buffer and has two active low enables (1G , 4G ), high enables (2G, 3G). Each enable independently controls four buffers. Low voltage and high speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • VCC = 2.0 V to 5.5 V All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.