Hitachi HD74HC259
The HD74HC259 has a single data input (D), 8 latch outputs (Q0-Q7), 3 address inputs (A, B, and C), a common enable input (E), and a common clear input. When enable is taken low the data flows through to the addressed output. The data is stored when enable transitions from low to high.| Part No. | HD74HC259 |
|---|---|
| Datasheet | HD74HC259 Download |
| Manufacturer |  Hitachi |
| Description | 8-bit Addressable Latch |
| Buy | Stock & Price |
DESCRIPTION
To operate this device as an addressable latch, data is held on the D input, and the address of the latch into which the data is to be entered is held on the A, B and C inputs. All unaddressed latches will remain unaffected. With enable in the high state the device is deselected, and all latches remain in their previous state, unaffected by changes on the data or address inputs. To eliminate the possibility of entering erroneous data into the latches, the enable should be held high (inactive) while the address lines are changing. If enable is held high and clear is taken low all eight latches are cleared to a low state. If enable is low all latches except the addressed latch will be cleared. The addressed latch will instead follow the D input, effectively implementing a 3-to-8 line decoder.FEATURES
●●
●
●
● High Speed Operation: tpd (Data to Output) = 16 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Curr...
