HD74LV541A Datasheet | Hitachi Semiconductor

Description The HD74LV541A has eight line drivers with three state outputs in a 20 pin package. When OE1 and OE2 is low level, this drivers set up output is enable. Low-voltage operation is suitable for battery-powered products (e.g., notebook puters), and the low-power consumption extends the battery life. Features - - - - - - VCC = 2.0 V to 5.5 V operation All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C) Output current ±8 m A (@VCC = 3.0 V to 3.6 V), ±16 m A (@VCC = 4.5 V to 5.5 V) Function Table Inputs OE1 L L H X Note: H: L: X: Z: High level Low level Immaterial High impedance OE2 L L X H A L H X X Output Y L H Z Z Pin Arrangement OE1 1 A1 2 A2 3 A3 4 A4 5 A5 6 A6 7 A7 8 A8 9 GND 10 20 VCC 19 OE2 18 Y1 17 Y2 16 Y3 15 Y4 14 Y5 13 Y6 12 Y7 11 Y8 (Top view) Absolute Maximum Ratings Item Supply voltage range Input voltage range- 1 1, 2 Symbol VCC VI VO Ratings - 0.5 to 7.0 - 0.5 to 7.0 - 0.5 to VCC + 0.5 - 0.5 to 7.0 Unit V V V Conditions Output voltage range- Output: H or L VCC: OFF or Output: Z Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation at Ta = 25°C (in still air)- 3 I IK I OK IO I CC or IGND PT - 20 ±50 ±35 ±70 835 757 m A m A m A m A m W VI < 0 VO < 0 or VO > VCC VO = 0 to VCC SOP TSSOP Storage temperature Tstg - 65 to 150 °C Notes: The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Remended Operating Conditions Item...