Datasheet4U Logo Datasheet4U.com

HMC985 - Gaas mmic voltage

General Description

The HMC985 is an absorptive Voltage Variable Attenuator (VVA) which operates from 20 - 50 GHz and is ideal in designs where an analog DC control signal must be used to control RF signal levels over a 35 dB dynamic range.

Key Features

  • Wide Bandwidth: 20 - 50 GHz Excellent Linearity: +32 dB Input IP3 Wide Attenuation Range: 35 dB Die Size: 2.78 x 1.37 x 0.1 mm General.

📥 Download Datasheet

Datasheet Details

Part number HMC985
Manufacturer Hittite Microwave Corporation
File Size 825.62 KB
Description Gaas mmic voltage
Datasheet download datasheet HMC985 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC985A GaAs MMIC VOLTAGE - VARIABLE ATTENUATOR Analog Devices
HMC985ALP4KE GaAs MMIC VOLTAGE - VARIABLE ATTENUATOR Analog Devices
HMC985LP4KE GaAs MMIC VOLTAGE - VARIABLE ATTENUATOR Analog Devices
HMC980LP4E Active Bias Controller Analog Devices
HMC981LP3E ACTIVE BIAS CONTROLLER Analog Devices

Other Datasheets by Hittite Microwave Corporation

Part Number Description
HMC980 Active Bias Controller
HMC980LP4E ACTIVE BIAS CONTROLLER
HMC981 ACTIVE BIAS CONTROLLER
HMC907 1/2 Watt Power Amplifier
HMC911LC4B BROADBAND ANALOG TIME DELAY

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr HMC985 v00.0211 Gaas mmic voltage - variable attenuator, 20 - 50 GHz 0 attenuators - analog - Chip Typical Applications The HMC985 is ideal for: • Point-to-Point Radio • VSAT Radio • Test Instrumentation • Microwave Sensors • Military, ECM & Radar Features Wide Bandwidth: 20 - 50 GHz Excellent Linearity: +32 dB Input IP3 Wide Attenuation Range: 35 dB Die Size: 2.78 x 1.37 x 0.1 mm General Description The HMC985 is an absorptive Voltage Variable Attenuator (VVA) which operates from 20 - 50 GHz and is ideal in designs where an analog DC control signal must be used to control RF signal levels over a 35 dB dynamic range. It features two shunt-type attenuators which are controlled by two analog voltages, Vctrl1 and Vctrl2.