HT6551 Datasheet | Holtek Microelectronics

Super I/O Controller Features - 100% patible to IBM PC AT/XT - Fully IBM- BIOS patible floppy disk controller - 48m A floppy drive interface buffers - Support two floppy drives with capability of supporting up to four drives with an external decoder - Support 360K/720K/1.2M/1.44M/2.88M formats - Support 250Kb/s, 300Kb/s, 500Kb/s, 1Mb/s data rate - Digital data separator eliminates critical analog adjustments - Two 16550 patible UARTs - Independent control of transmit,receive,line status and data set interrupts on each channel - Individual modem control signals for each channel - Programmable serial interface charac- teristics for each channel: 16 Byte FIFOS 5-, 6-, 7-, or 8-bit characters Even,odd or no parity bit generation and detection 1-, 1.5-, or 2-stop bit generation - Programmable baud rate generator for each channel which allows division of the timing reference clock input by 1 to (216- 1) - Only one 24MHz crystal for FDC and UARTs - One IBM PC bidirection parallel port for printer - Support AT full function Game port - Support AT hard disk IDE interface - Hardware/software configuration setup available - Individual disable feature available - Power saving feature available - 100 pin PQFP package Applications - Super (Multi) I/O interface card 5th Mar ’96 General Description The HT6551 super Multi I/O chip, is an advanced CMOS single chip controller offering the plete I/O solutions for the IBM AT environments. It incorporates one floppy disk controller (FDC), two full function UARTs, one parallel port, one bus mouse port, one game port controller, IDE hard disk drive interface, standard AT address decoding for on- chip function and four configuration registers in one chip. It is fabricated with HOLTEK’s high- reliability CMOS technology. The HT6551 super Multi I/O chip contains one floppy disk controller which supports two floppy drives with capability of supporting up to four drives with an external decoder and is patible...