IC-DP Datasheet | IC-Haus

.Data Sheet.co.kr i C-DP HIGHSIDE SWITCH Rev C3, Page 1/8 Features o 36 V highside switch/level shifter o p-channel output driver without charge pump for short activation time o Decoupling of input and output reference voltages (SOT23-6L) permits control by 5V logic o 200 m A of output current o Short-circuit protected o Output with an active freewheeling circuit o On-chip overtemperature protection with hysteresis o 4 to 36 V input voltage range o Input with hysteresis o 3-pin configuration possible o Wide temperature range of -40 to 120 °C APPLICATIONS o Highside switch for industrial applications, such as relays, inductive proximity sensors and light barriers PACKAGES SOT23-6L BLOCK DIAGRAM 3-pin configuration PI i C-DP INPUT INTERFACE HIGH-SIDE SWITCH & Tj < 120°C temperature monitor 200 m A 3.5 V Copyright © 2011 i C-Haus http://.ichaus. Datasheet pdf - http://..net/ .Data Sheet.co.kr i C-DP HIGHSIDE SWITCH Rev C3, Page 2/8 DESCRIPTION i C-DP is a monolithic highside switch for ohmic, inductive and capacitive loads. Designed for a wide input voltage range of 4 to 36 V, it is capable of supplying a minimum output current of 200 m A. The output acts as a current source with a low saturation voltage; protection against shortcircuiting is provided by the device shutting down with excessive temperature. The chip is activated when the input voltage threshold V(PI)-V(NI) of typically 3.5 V is exceeded. When used as a 4-pin element, the input (PI, NI) and output (DP, VP) reference voltages are decoupled. The maximum permissive voltage difference between VP and PI is 36 V. PACKAGES SOT23-6L (JEDEC) PIN CONFIGURATION SOT23-6L (JEDEC), 1.6 mm PIN FUNCTIONS No. Name Function 1 2 3 4 5 6 NI PI DP VP n.c. n.c. Negative Input Positive Input Output Supply Datasheet pdf - http://..net/ .Data Sheet.co.kr i C-DP HIGHSIDE SWITCH Rev C3, Page 3/8...