IP175C Datasheet | IC Plus

Features General Description IP175A PCB patible (pins patible) IP175C/IP175CH integrates a 6-port switch Built in 6 MAC and 5 PHY controller, SSRAM, and 5 10/100 Ethernet Each port can be configured to be 10Base-T, transceivers. Each of the transceivers plies 100Base-TX with the IEEE802.3, IEEE802.3u, and IEEE802.3x 2k MAC address specifications. The DSP approach is utilized for Support auto-polarity for 10Mbps designing transceivers with 0.18um technology; they have high noise immunity and robust Filter/ forward reserved address option Broadcast storm protection performance. Auto MDI-MDIX Support three MII/RMII ports IP175C/IP175CH operates in store and forward Support SMI with MDC up to 12.5 Mhz mode. It supports flow control, auto MDI/MDI-X, Support tagging & un-tagging Co S, port base VLAN, bandwidth control, Diff Serv, Support Port base VLAN & tag VLAN SMART MAC and LED functions, etc. Each port Support Co S can be configured to auto-negotiation or forced Support port security option 10M/100M, full/half duplexmode. Using an Support SMART MAC function EEPROM or pull up/down resistors on specified Support spanning tree protocol pins can configure the desired options. Max packet length 1552/ 1536 bytes Support 8-level bandwidth control Besides a 5-port switch application, Support Link quality LED for 100Mbps IP175C/IP175CH supports three MII/RMII ports for . Support direct, serial and dual color mode LED router application, which supports 4 LAN ports, one WAN port and one HOME/PNA or Access Support one fiber port with far end fault point. The external MAC can monitor or configure function for IP175CH only IP175C/IP175CH by accessing MII registers Built in linear regulator control circuit Low power consumption through SMI0. 0.18um, 128-pin PQFP MII/RMII port also can be configured to be MAC Support Lead Free package (Please refer to mode. It is used to interface an external PHY to the Order Information) work as a 5+1 switch. Through SMI1 IP175C/IP175CH can monitor...