IP113F Datasheet | ICp

.. Preliminary Data Sheet Managed 10/100Base-TX / FX Media Converter Features A 10/100BASE-TX/ 100BASE-FX converter with a SMI port for management Built in a 10/100BASE-TX transceiver Built in a PHY for 100BASE-FX Built in a 2-port switch - Pass all packets without address and CRC check (optional) - Supports modified cut-through frame forwarding for low latency - Supports pure converter mode data forwarding for extreme low latency - Supports flow control for full and half duplex operation - Bandwidth control - Forward 1600 bytes packet for management - Optional forward fragments Built in 128Kb RAM for data buffer Supports 3.3v I/O tolerance SMI (MDC, MDIO) and MII registers for management - Configure local and remote IP113F through local SMI - Monitor local and remote IP113F through local SMI - Configure/ monitor TP port support (auto-negotiation or force 10M/100M, full/half) - Configure/ monitor flow control, bandwidth - Supports loop back test (In-band or out-band, auto or program) - The maintenance frame is patible to TS-1000 standard (the Telemunication Technology mittee, TTC) Supports Statistic Counters Supports auto MDI-MDIX function Supports link fault pass through function Supports far end fault function LED display for link/activity, full/half, 10/100 Built in a watchdog timer to monitor internal switch error Supports EEPROM Configuration 0.25u CMOS technology Single 2.5V power supply 48-pin LQFP package General Description IP113F can be a 10/100BASE-TX to 100BASE-FX converter or a 100BASE-FX to 100BASE-FX repeater with an SMI port for management. It consists of a 2-port switch controller, a fast Ethernet transceiver and a PHY for 100BASE-FX. The transceivers in IP113F are designed in DSP approach with advance 0.25um technology; this results in high noise immunity and robust performance. IP113F not only supports store and forward mode, it also supports modified cut through mode and pure converter mode for low latency...