IS25LP064
IS25LP064 is 3V SERIAL FLASH MEMORY manufactured by ISSI.
- Part of the IS25LP032 comparator family.
- Part of the IS25LP032 comparator family.
FEATURES
- Industry Standard Serial Interface
- IS25LP128: 128M-bit/16M-byte
- IS25LP064: 64M-bit/8M-byte
- IS25LP032: 32M-bit/4M-byte
- 256 bytes per Programmable Page
- Supports standard SPI, Fast, Dual, Dual I/O, QPI, SPI DTR, Dual SPI DTR I/O, and QPI
- Double Transfer Rate (DTR) option
- Supports Serial Flash Discoverable Parameters (SFDP)
- High Performance Serial Flash (SPI)
- 50MHz Normal and 133Mhz Fast Read
- 532 MHz equivalent QPI
- DTR (Dual Transfer Rate) up to 66MHz
- Selectable dummy cycles
- Configurable drive strength
- Supports SPI Modes 0 and 3
- More than 100,000 erase/program cycles
- More than 20-year data retention
- Flexible & Efficient Memory Architecture
- Chip Erase with Uniform: Sector/Block Erase (4K/32K/64K-Byte)
- Program 1 to 256 bytes per page
- Program/Erase Suspend & Resume
- Low Power with Wide Temp. Ranges
- Single 2.3V to 3.6V Voltage Supply
- 10 m A Active Read Current
- 10 µA Standby Current
- 5 µA Deep Power Down
- Temp Grades: Extended: -40°C to +105°C V Grade: -40°C to +125°C Auto Grade: up to +125°C
- Advanced Security Protection
- Software and Hardware Write Protection
- Power Supply lock protect
- 4x256-Byte dedicated security area with user-lockable bits, (OTP) One Time Programmable Memory
- 128 bit Unique ID for each device
- Industry Standard Pin-out & Packages
- JM =16-pin SOIC 300mil
- JB = 8-pin SOIC 208mil
- JF = 8-pin VSOP 208mil
- JK = 8-contact WSON 6x5mm
- JL = 8-contact WSON 8x6mm
- JG= 24-ball TFBGA...
