IS25LP064A Datasheet | ISSI

FEATURES - Industry Standard Serial Interface - IS25LP064A: 64Mbit/8Mbyte - 256 bytes per Programmable Page - Supports standard SPI, Fast, Dual, Dual I/O, Quad, Quad I/O, SPI DTR, Dual I/O DTR, Quad I/O DTR, and QPI - Supports Double Transfer Rate (DTR) - Supports Serial Flash Discoverable Parameters (SFDP) - High Performance Serial Flash (SPI) - 133Mhz Fast Read at Vcc=2.7V to 3.6V - 104Mhz Fast Read at Vcc=2.3V to 3.6V - 532MHz equivalent at QPI operation - 50MHz Normal Read - DTR (Dual Transfer Rate) up to 66MHz - Selectable dummy cycles - Configurable drive strength - Supports SPI Modes 0 and 3 - More than 100,000 erase/program cycles - More than 20-year data retention - Flexible & Efficient Memory Architecture - Chip Erase with Uniform Sector/Block Erase (4/32/64 Kbyte) - Program 1 to 256 bytes per page - Program/Erase Suspend & Resume - Efficient Read and Program modes - Continuous Read 8/16/32/64-Byte burst Wrap - Selectable burst length - QPI for reduced instruction overhead - Low Power with Wide Temp. Ranges - Single 2.3V to 3.6V Voltage Supply - 5 m A Active Read Current (typ.) - 10 µA Standby Current (typ.) - 5 µA Deep Power Down (typ.) - Temp Grades: Extended: -40°C to +105°C Auto Grade (A3): -40°C to +125°C - Advanced Security Protection - Software and Hardware Write Protection - Power Supply lock protect - 4x256-Byte dedicated security area with OTP user-lockable bits - 128 bit Unique ID for each device (Call Factory) - Industry Standard Pin-out & Packages(1),(2) - B = 8-pin SOIC 208mil - T = 8-contact USON...