IS66WVO16M8EDALL
IS66WVO16M8EDALL is 1.8V/3.0V SERIAL PSRAM MEMORY manufactured by ISSI.
FEATURES
- Industry Standard Serial Interface
- Octal Peripheral Interface (OPI) Protocol
- Low Signal Counts :11 Signal pins (CS#, SCLK, DQSM, SIO0~SIO7)+ optional ERR output
- High Performance
- On chip ECC (chunk size = 4 bit): 1-bit correction and 2-bit detection
- Double Transfer Rate (DTR) Operation
- Up to 166MHz (333MB/s)
- Source Synchronous Output signal during Read Operation (DQSM)
- Data Mask during Write Operation (DQSM)
- Configurable Latency for Read/Write Operation)
- Supports Variable Latency mode and Fixed Latency mode
- Configurable Drive Strength
- Supports Wrapped Burst mode and Continuous Burst mode
- Supports Deep Power Down mode
- Hidden Refresh
- Burst Operation
- Configurable Wrapped Burst Length : 16, 32, 64, and 128
- Word Order Burst Sequence
- Continuous Burst Operation:
- Continues Read operation until the end of array address
- Continues Write operation even after the end of array address
- Low Power Consumption
- Single 1.7V to 1.95V Voltage Supply
- Single 2.7V to 3.6V Voltage Supply
- 750 µA Standby Current (typ.)
- Hardware Features
- SCLK Input: Serial clock input
- SIO0
- SIO7:
Serial Data Input or Serial Data Output
- DQSM:
- Output during mand, address transactions as Refresh Collision Indicator
- Output during read data transactions as Read Data Strobe
- Input during write data transactions as Write Data Mask
- RESET#: Hardware Reset pin
- ERR: ECC Event indicator
- Temperature Grades
- Industrial: -40°C to +85°C
- Auto (A1) Grade: -40°C to...
