IXYS IX6Q11
The IX6Q11 Bridge Driver for N-channel MOSFETs and IGBTs with a high side and low side output, whose input signals reference the low side. The High Side driver can control a MOSFET or IGBT connected to a positive bus voltage up to 300V in dynamic conditions. The logic input stages are compatible with TTL or CMOS, have built-in hysteresis and are fully immune to latch up over the entire operating range.| Part No. | IX6Q11 |
|---|---|
| Datasheet | IX6Q11 Download |
| Manufacturer |  IXYS |
| Description | 6 Ampere High & Low-side Driver |
| Buy | Stock & Price |
FEATURES
● Floating High Side Driver with boot-strap Power supply along with a Low Side Driver.● Fully operational to 300V*
● ± 50V/ns dV/dt immunity
● Gate drive power supply range: 10 - 35V
● Undervoltage lockout for both output drivers
● Separate Logic power supply range: 3.3V to VCL
● Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes
● Latch-Up protected over entire operating range
● High peak output current: 6A
● Matched propagation delay for both outputs
● Low output impedance
● Low power supply current
● Immune to negative voltage transients
GENERAL DESCRIPTION
The IX6Q11 can withstand dV/dt on the output side up to ± 50V/ns. Ordering Information The IX6Q11 is available in the 14-Pin DIP, the 16-Pin SOIC, and the heat-sinkable 18-Pin SOIC CooltabTM packages. Part Number Package TypeAPPLICATIONS
●●
●
●
●
● Driving MOSFETs and IGBTs in half-bridge circuits High voltage, high side and low side drivers Motor Controls Switch Mode Power Supplies (SMPS)...
