Datasheet4U Logo Datasheet4U.com

IXD1209 - High Speed LDO Regulator

General Description

The IXD1209/12 are a highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes.

The IXD1209/12 have a high ripple rejection factor and low dropout.

Key Features

  • o Output Current up to 150 mA (300 mA for IXD2109E/H type) o Output Voltage Range from 0.9 V to 6.0 V with 0.05 V increments o Output Voltage Accuracy ±2% (at VOUT > 1.5 V), ± 30 mV (at VOUT ≤ 1.5 V) o Dropout Voltage 60 mV @ 30 mA , 0.20 V @ 100 mA o Maximum Operating Voltage 10 V o Low Power Consumption at 25 µA typical o Standby Current less than 0.1 µA typical o Ripple Rejection 70 dB at 10 kHz o Low ESR Ceramic Capacitor compatible o Operating Ambient Temperature - 40 + 850C o Packages : SO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IXD604 4-Ampere Dual Low-Side Ultrafast MOSFET Drivers Clare
IXDA20N120AS High Voltage IGBT IXYS Corporation
IXDD404 4 Amp Dual Low-Side Ultrafast MOSFET Driver IXYS Corporation
IXDD404PI 4 Amp Dual Low-Side Ultrafast MOSFET Driver IXYS Corporation
IXDD404SI 4 Amp Dual Low-Side Ultrafast MOSFET Driver IXYS Corporation

Other Datasheets by IXYS (now Littelfuse)

Part Number Description
IXD1212 High Speed LDO Regulator
IXD1504 0.6uA Current Consumption Voltage Regulator
IXD1701 28V Input High Speed Voltage Regulator
IXD5121 Voltage Detector
IXD5122 Voltage Detector

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IXD1209/12 High Speed LDO Regulator with ON/OFF Control FEATURES o Output Current up to 150 mA (300 mA for IXD2109E/H type) o Output Voltage Range from 0.9 V to 6.0 V with 0.05 V increments o Output Voltage Accuracy ±2% (at VOUT > 1.5 V), ± 30 mV (at VOUT ≤ 1.5 V) o Dropout Voltage 60 mV @ 30 mA , 0.20 V @ 100 mA o Maximum Operating Voltage 10 V o Low Power Consumption at 25 µA typical o Standby Current less than 0.