BTS7710GP Datasheet | Infineon

Overview Features BTS 7710 GP Quad D-MOS switch driver Free configurable as bridge or quad-switch Optimized for DC motor management applications Low RDS ON: 70 mτ high-side switch, 40 mτ low-side switch (typical values @ 25 C) Maximum peak current: typ. 15 A @ 25 C= Very low quiescent current: typ. 5 ←A @ 25 C= Small outline, thermal optimized Power Pak Load and GND-short-circuit-protection Operates up to 40 V Status flag diagnosis Overtemperature shut down with hysteresis Internal clamp diodes Isolated sources for external current sensing Under-voltage detection with hysteresis PWM frequencies up to 50 k Hz Ordering Code Q67006-A9400 P-TO263-15-1 Type BTS 7710 GP 1.2 Description Package P-TO263-15-1 The BTS 7710 GP is part of the Trilith IC family containing three dies in one package: One double high-side switch and two low-side switches. The drains of these three vertical DMOS chips are mounted on separated leadframes. The sources are connected to individual pins, so the BTS 7710 GP can be used in H-bridge- as well as in any other configuration. The double high-side is manufactured in SMART SIPMOS® technology which bines low RDS ON vertical DMOS power stages with CMOS control circuitry. The high-side switch is fully protected and contains the control and diagnosis circuitry. To achieve low RDS ON and fast switching performance, the low-side switches are manufactured in S-FET logic level technology. The equivalent standard product is the BUZ 103 SL. In contrast to the BTS 7710 G, which consists of the same chips in an P-DSO-28 package, the P-TO263-15-1 Power Pack offers a much lower thermal resistance, which opens up applications with even higher currents in the automotive and industrial area. Data Sheet 1 2001-02-01 BTS 7710 GP Pin Configuration (top view) Molding pound IL1 NC SL1 NC SH1 GND IH1 DHVS ST IH2 SH2 NC IL2 NC SL2 Figure 1 1 Heat-Slug 1 2 18 3 4 5 Heat-Slug 2 6 7 8 9 10 11 12 Heat-Slug 3 13 16 14 15 DL2 17 DHVS DL1 Data Sheet 2001-02-...