BTS7750GP Datasheet | Infineon

Overview Features BTS 7750 GP Quad D-MOS switch driver Free configurable as bridge or quad-switch Optimized for DC motor management applications Low RDS ON: 70 mτ high-side switch, 45 mτ lowside switch (typical values @ 25 C) Maximum peak current: typ. 12 A @ 25 C= Very low quiescent current: typ. 5 ←A @ 25 C= Small outline, thermal optimized Power Pak Full short-circuit-protection Operates up to 40 V Status flag diagnosis Overtemperature shut down with hysteresis Internal clamp diodes Isolated sources for external current sensing Under-voltage detection with hysteresis PWM frequencies up to 1 k Hz Ordering Code Q67006-A9402 P-TO263-15-1 Type BTS 7750 GP 1.2 Description Package P-TO263-15-1 The BTS 7750 GP is part of the Trilith IC family containing three dies in one package: One double high-side switch and two low-side switches. The drains of these three vertical DMOS chips are mounted on separated leadframes. The sources are connected to individual pins, so the BTS 7750 GP can be used in H-bridge- as well as in any other configuration. Both the double high-side and the two low-side switches of the BTS 7750 GP are manufactured in SMART SIPMOS® technology which bines low RDS ON vertical DMOS power stages with CMOS control circuitry. The high-side switch is fully protected and contains the control and diagnosis circuitry. Also the low-side switches are fully protected, the equivalent standard product is the BTS 134 D. In contrast to the BTS 7750 G, which consists of the same chips in an P-DSO-28 package, the P-TO263-15-1 Power Pack offers a much lower thermal resistance, which opens up applications with even higher currents in the automotive and industrial area. Data Sheet 2001-02-01 BTS 7750 GP Pin Configuration (top view) Molding pound IL1 NC SL1 NC SH1 GND IH1 DHVS ST IH2 SH2 NC IL2 NC SL2 Figure 1 1 Heat-Slug 1 2 18 3 4 5 Heat-Slug 2 6 7 8 9 10 11 12 Heat-Slug 3 13 16 14 15 DL2 17 DHVS DL1 Data Sheet 2001-02-01 BTS 7750 GP 1.4 Pin No. 1...