Datasheet4U Logo Datasheet4U.com

IPN10EL-S - PN Half Bridge Driver IC

General Description

The IPN10EL-S is a gate driver IC dedicated to drive one p-channel and one n-channel MOSFET.

Typically these two MOSFETs are used as one leg in a bridge topology forming the converter for DC motor drives in automotive applications.

Key Features

  • Driver IC for one P- and one N-Channel Power MOSFETs.
  • 0 100 % Duty cycle of High- and Low Side MOSFETs.
  • Low quiescent current mode.
  • Adjustable dead time.
  • One Error output to µC.
  • Over temperature protection.
  • Under voltage lock out.
  • Green Product (RoHS compliant).
  • AEC Qualified.
  • Programmable supply function for normal and logic level MOSFETs PG-SSOP-14.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IPN1M50T-H SLLIMM-nano small low-loss intelligent molded module IPM STMicroelectronics
IPN2M50-H SLLIMM-nano small low-loss intelligent molded module IPM STMicroelectronics
IPN2M50T-H SLLIMM-nano small low-loss intelligent molded module IPM STMicroelectronics
IPN2M50T-HL SLLIMM-nano small low-loss intelligent molded module IPM STMicroelectronics
IPN50R1K4CE MOSFET Infineon

Other Datasheets by Infineon

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IPN10EL-S PN Half Bridge Driver IC Data Sheet Rev 1.1, 2014-01-21 Automotive Power PN Half Bridge Driver IC IPN10EL-S 1 Overview Features • Driver IC for one P- and one N-Channel Power MOSFETs • 0 ... 100 % Duty cycle of High- and Low Side MOSFETs • Low quiescent current mode • Adjustable dead time • One Error output to µC • Over temperature protection • Under voltage lock out • Green Product (RoHS compliant) • AEC Qualified • Programmable supply function for normal and logic level MOSFETs PG-SSOP-14 Description The IPN10EL-S is a gate driver IC dedicated to drive one p-channel and one n-channel MOSFET. Typically these two MOSFETs are used as one leg in a bridge topology forming the converter for DC motor drives in automotive applications.