TLE6361G Datasheet | Infineon

.. TLE 6361 G Multi-Voltage Processor Power Supply Data Sheet 1 1.1 - - - - - - - - Overview Features - - - - - - - - High efficiency regulator system Wide input voltage range, up to 60V Stand-by mode with low current consumption Suitable for standard 12V, 24V and 42V Power Nets Step down converter as pre-regulator: 5.5V / 1.5A Step down slope control for lowest EME Switching loss minimization Three high current linear post-regulators with selectable output voltages: 5V / 800m A 3.3V or 2.6V / 500m A 5V or 3.3V / 350m A Six independent voltage trackers (followers): 5V / 17m A each Stand-by regulator with 1m A current capability Three independent undervoltage detection circuits (e.g. reset, early warning) for each linear post-regulator Power on reset functionality Window watchdog triggered by SPI Tracker control and diagnosis by SPI All outputs protected against short-circuit Power-DSO-36 package Ordering Code Q 67007-A9466 Package P-DSO-36-12 Type TLE 6361 G SMD = Surface Mounted Device P-DSO-36-12 Data Sheet, Rev. 1.31 2004-10-12 .. TLE 6361 G Short functional description The TLE 6361 G is a multi voltage power supply system especially designed for automotive applications using a standard 12V or 24V battery as well as the new 42V powernet. The device is intended to supply 32 bit micro-controller systems which require different supply voltage rails such as 5V, 3.3V and 2.6V. The regulators for external sensors are also provided. The TLE 6361 G cascades a Buck converter block with a linear regulator and tracker block on a single chip to achieve lowest power dissipation thus being able to power the application even at very high ambient temperatures. The step-down converter delivers a pre-regulated voltage of 5.5V with a minimum current capability of 1.5A. Supplied by this step down converter three low drop linear post-regulators offer 5V, 3.3V, or 2.6V of output voltages depending on the configuration of the device...