BGSA144ML10 Datasheet | Infineon

Features - Low RON resistance of 1.74 Ω at each RF port in ON state - Ultra low COFF capacitance of 89 f F in OFF state - Individually controlled reflective open or short to ground OFF ports to eliminate unwanted antenna resonances - High RF operating voltage handling 80 V in OFF state - MIPI RFFE 2.1 pliant control interface - External USID_SEL pin enabling 4 default USID addresses - Small form factor 1.1 mm x 1.5 mm (MSL1, 260 °C per JEDEC J-STD-020) Potential applications - Impedance, Antenna and Inductance Tuning - Tunable Filters Description The BGSA144ML10 is a single-pole four throws (SP4T) Antenna Tuning switch optimized for RF applications up to 7.125 GHz. The BGSA144ML10 is made of 4 low ON resistance / low OFF capacitance series switches and 4 shunt to ground switches enabling on-demand open-reflective or short-reflective OFF ports behavior. This last feature is of great value to reduce antenna engineer development time in case of unwanted antenna resonance or to improve antenna efficiency with less ponent tuning effort. Datasheet Summary .infineon. Please read the Important Notice and Warnings at the end of this document page 1 of 2 Revision 2.0 2021-12-07 Ultra high RF voltage antenna tuning SP4T Block diagram and ordering information Figure 1 BGSA144ML10 Block diagram Table 1 Ordering Information Type Marking A4 Package TSLP-10-3 Product name BGSA 144ML10 E6327 For more technical information, please contact our Technical Assistance Center or your local Infineon representative. Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2019-09-16 Published by Infineon Technologies AG 81726 München, Germany © 2022 Infineon Technologies AG. All Rights Reserved. Do you have a question about this document? Email: erratum@infineon. Document reference ifx1 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or...