BGSA148MN10 Datasheet | Infineon

Features - Ultra low RON resistance of 0.8 Ω in ON state - Low COFF capacitance of 155 f F in OFF state - RF operating voltage handling 45 V in OFF state - MIPI RFFE 2.1 control interface - Support both 1.8V and 1.2V VIO operation - External USID_SEL pin enabling 4 default USID addresses - Small form factor 0.95 mm x 1.3 mm (MSL1, 260 °C per JEDEC J-STD-020) Potential applications - Impedance, antenna and Inductance tuning - Tunable filters Description The BGSA148MN10 is a single-pole four throws (SP4T) antenna tuning switch optimized for RF applications up to 7.125GHz. The BGSA148MN10 is made of 4 low ON resistance / low OFF capacitance series switches and 4 shunt to ground switches enabling on-demand open-reflective or short-reflective OFF ports behaviour. This last feature is of great value to reduce antenna engineer development time in case of unwanted antenna resonance or to improve antenna efficiency with less ponent tuning effort. Datasheet Summary .infineon. Please read the Important Notice and Warnings at the end of this document page 1 of 2 Revision 1.1 2022-10-11 Ultra small antenna tuning SP4T with resonance stoppers Block diagram and ordering information Figure 1 BGSA148MN10 Block diagram Table 1 Ordering Information Type Marking A8 Package TSNP-10-9 Product name BGSA 148MN10 E6327 For more technical information, please contact our Technical Assistance Center or your local Infineon representative. Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2019-09-16 Published by Infineon Technologies AG 81726 München, Germany © 2022 Infineon Technologies AG. All Rights Reserved. Do you have a question about this document? Email: erratum@infineon. Document reference ifx1 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”) . With respect to any examples, hints...