DPS310 Datasheet | Infineon

Digital XENSIVTM Barometric Pressure Sensor for Portable Devices Product Description The DPS310 is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption, capable of measuring both pressure and temperature. The pressure sensor element is based on a capacitive sensing principle which guarantees high precision during temperature changes. The small package makes the DPS310 ideal for mobile applications and wearable devices. The internal signal processor converts the output from the pressure and temperature sensor elements to 24 bit results. Each unit is individually calibrated, the calibration coefficients calculated during this process are stored in the calibration registers. The coefficients are used in the application to convert the measurement results to high accuracy pressure and temperature values. The result FIFO can store up to 32 measurement results, allowing for a reduced host processor polling rate. Sensor measurements and calibration coefficients are available through the serial I2C or SPI interface. The measurement status is indicated by status bits or interrupts on the SDO pin. Features - Operation range: Pressure: 300 - 1200 h Pa. Temperature: -40 - 85 °C. - Pressure sensor precision: ± 0.002 h Pa (or ±0.02 m) (high precision mode). - Relative accuracy: ± 0.06 h Pa (or ±0.5 m) - Absolute accuracy: ± 1 h Pa (or ±8 m) - Temperature accuracy: ± 0.5°C. - Pressure temperature sensitivity: 0.5Pa/K - Measurement time: Typical: 27.6 ms for standard mode (16x). Minimum: 3.6 ms for low precision mode. - Average current consumption: 1.7 µA for Pressure Measurement, 1.5u A for Temperature measurement @1Hz sampling rate, Standby: 0.5 µA. - Supply voltage: VDDIO: 1.2 - 3.6 V, VDD: 1.7 - 3.6 V. - Operating modes: mand (manual), Background (automatic), and Standby. - Calibration: Individually calibrated with coefficients for measurement correction. - FIFO: Stores up to 32 pressure or temperature measurements. -...