PVI5080NSPbF Datasheet | Infineon

General Description The PVI Series Photovoltaic Isolator generates an electrically isolated DC voltage upon receipt of a DC input signal. It is capable of directly driving gates of power MOSFETs or IGBTs. It utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. The output is controlled by radiation from a GaAlAs light emitting diode (LED), which is optically isolated from the photovoltaic generator. The PVI Series is ideally suited for applications requiring high-current and/or high-voltage switching with optical isolation between the low-level driving circuitry and high-energy or high-voltage load circuits. It can be used for directly driving gates of power MOSFETs. The dual-channel device allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to provide higher current drive for power MOSFETs or higher voltage drive for IGBTs. The PVI Series Photovoltaic isolators employ fast turn-off circuitry. These PVI Series Photovoltaic Isolators are packaged in 8-pin, molded DIP packages and available with either thru-hole or surface-mount (“gull-wing”) leads, in plastic shipping tubes. Applications -  Load Distribution -  Industrial Controls -  Current-to-Voltage Conversion -  Custom Solid-State Relay PVI5080NPbF, PVI5080NSPbF Photovoltaic Isolator Single Channel 5-10 Volt Output Features -  Isolated Voltage Source -  Monolithic Construction -  Up to 8A Output -  Single Output -  Solid-State Reliability Part Identification PVI5080NPbF PVI5080NSPbF thru-hole Surface-mount (gull-wing) 1 2017-12-05 PVI5080NPbF/PVI5080NSPbF Electrical Specifications (-40°C TA  +85°C unless otherwise specified) INPUT CHARACTERISTICS Input Current Range (see figure 4) Maximum Forward Voltage...