PVI5080N Datasheet | International Rectifier

Data Sheet No. PD10054-B Series PVI-N Photovoltaic Isolator Single and Dual Channel 5-10 Volt Output General Description The PVI Series Photovoltaic Isolator generates an electrically isolated DC voltage upon receipt of a DC input signal. It is capable of directly driving gates of power MOSFETs or IGBTs. It utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. The output is controlled by radiation from a GaAlAs light emitting diode (LED), which is optically isolated from the photovoltaic generator. The PVI Series is ideally suited for applications requiring high-current and/or high-voltage switching with optical isolation between the low-level driving circuitry and high-energy or high-voltage load circuits. It can be used for directly driving gates of power MOSFETs. The dual-channel device allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to provide higher current drive for power MOSFETs or higher voltage drive for IGBTs. The PVI Series Photovoltaic isolators employ fast turn-off circuitry. These PVI Series Photovoltaic Isolators are packaged in 8-pin, molded DIP packages and available with either thru-hole or surface-mount (“gull-wing”) leads, in plastic shipping tubes. Features ! ! ! ! ! Isolated Voltage Source Monolithic Construction Up to 8µA Output Single or Dual Output Solid-State Reliability Applications ! ! ! ! Load Distribution Industrial Controls Current-to-Voltage Conversion Custom Solid-State Relay Part Identification PVI1050N PVI5050N PVI5080N PVI1050NS PVI5050NS PVI5080NS thru-hole surface-mount (gull-wing) .irf. 1 Series PVI-N Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS Input Current...