TLE9350VSJ
TLE9350VSJ is High speed CAN FD transceiver manufactured by Infineon.
High speed CAN FD transceiver
Features
- Fully pliant to ISO 11898-2:2016 and SAE J2284-4/-5
- Loop delay symmetry for CAN FD data frames up to 5 MBit/s
- Certified according to Ve LIO (Vehicle LAN Interoperability and
Optimization) test requirements
- Very low electromagnetic emission (EME) allows the use without additional mon mode choke
- VIO input for voltage adaption to the microcontroller interface (3.3 V or 5 V)
- Excellent ESD robustness
- Tx D time-out function
- Very low CAN bus leakage current in power-down state
- Overtemperature protection
- Protected against automotive transients according to ISO 7637 and SAE J2962-2
- Power-save mode
- Green Product (Ro HS pliant)
Potential applications
- Engine control units (ECU)
- Electric power steering
- Transmission control units (TCUs)
- Chassis control modules
Product validation
Qualified for automotive applications. Product validation according to AEC-Q100.
Description
The TLE9350VSJ is a high speed CAN transceiver, used in HS CAN systems for automotive applications as well as for industrial applications. It is designed to fulfill the requirements of ISO 11898-2:2016 physical layer specification as well as SAE J1939 and SAE J2284. The TLE9350VSJ is available in a Ro HS pliant, halogen free PG-DSO-8 package. As an interface between the physical bus layer and the HS CAN protocol controller, the TLE9350VSJ is designed to protect the microcontroller against interferences generated inside the network. A very high ESD
.infineon./TLE9350VSJ
Rev. 1.2 2022-03-18
High speed CAN FD transceiver robustness and the optimized RF immunity allows the use in automotive applications without additional protection devices, such as suppressor diodes or mon mode chokes.
Based on the high symmetry of the CANH and CANL output signals, the TLE9350VSJ provides a very low level of electromagnetic emission (EME) within a wide frequency range. The TLE9350VSJ fulfills even...
