TLE9351BSJ
TLE9351BSJ is High speed CAN FD transceiver manufactured by Infineon.
High speed CAN FD transceiver
Features
- Fully pliant to ISO 11898-2:2016 and SAE J2284-4/-5
- Loop delay symmetry for CAN FD data frames up to 5 Mbit/s
- Very low electromagnetic emission (EME) allows the use without additional mon mode choke
- Bus wake-up pattern (WUP) function with optimized filter time for worldwide OEM usage
- Standby mode with minimized quiescent current
- Excellent ESD robustness
- Tx D timeout function
- Very low CAN bus leakage current in power-down state
- Overtemperature protection
- Protected against automotive transients according to ISO 7637 and SAE J2962-2
- Green Product (Ro HS pliant)
Potential applications
- Engine control units (ECU)
- Gateway modules
- Body control modules (BCM)
Product validation
Qualified for automotive applications. Product validation according to AEC-Q100.
Description
The TLE9351BSJ is a high speed CAN transceiver, used in HS CAN systems for automotive applications as well as for industrial applications. It is designed to fulfill the requirements of ISO 11898-2:2016 physical layer specification as well as SAE J1939 and SAE J2284. The TLE9351BSJ is available in a Ro HS pliant, halogen free PG-DSO-8 package. As an interface between the physical bus layer and the HS CAN protocol controller, the TLE9351BSJ is designed to protect the microcontroller against interferences generated inside the network. A very high ESD robustness and the optimized RF immunity allows the use in automotive applications without additional protection devices, such as suppressor diodes or mon mode chokes.
.infineon./automotive-transceivers
Rev. 1.0 2023-08-11
High speed CAN FD transceiver
Based on the high symmetry of the CANH and CANL output signals, the TLE9351BSJ provides a very low level of electromagnetic emission (EME) within a wide frequency range. The TLE9351BSJ fulfills even stringent EMC test limits without an additional external circuit, such as a mon mode...
