TLE9351VSJ
TLE9351VSJ is High speed CAN FD transceiver manufactured by Infineon.
High speed CAN FD transceiver
Features
- Fully pliant to ISO 11898-2:2016 and SAE J2284-4/-5
- Loop delay symmetry for CAN FD data frames up to 5 MBit/s
- Certified according to Ve LIO (Vehicle LAN Interoperability and
Optimization) test requirements
- Very low electromagnetic emission (EME) allows the use without additional mon mode choke
- VIO input for voltage adaption to the microcontroller interface (3.3 V or 5 V)
- Bus wake-up pattern (WUP) function with optimized filter time for worldwide OEM usage
- Stand-by mode with minimized quiescent current
- Transmitter supply VCC can be disabled in stand-by mode to further minimize quiescent current
- Excellent ESD robustness
- Tx D time-out function
- Very low CAN bus leakage current in power-down state
- Overtemperature protection
- Protected against automotive transients according to ISO 7637 and SAE J2962-2
- Green Product (Ro HS pliant)
Potential applications
- Gateway modules
- Body control modules (BCM)
Product validation
Qualified for automotive applications. Product validation according to AEC-Q100.
Description
The TLE9351VSJ is a high speed CAN transceiver, used in HS CAN systems for automotive applications as well as for industrial applications. It is designed to fulfill the requirements of ISO 11898-2:2016 physical layer specification as well as SAE J1939 and SAE J2284. The TLE9351VSJ is available in a Ro HS pliant, halogen free PG-DSO-8 package. As an interface between the physical bus layer and the HS CAN protocol controller, the TLE9351VSJ is designed to protect the microcontroller against interferences generated inside the network. A very high ESD
.infineon./TLE9351VSJ
Rev. 1.2 2022-03-18
High speed CAN FD transceiver robustness and the optimized RF immunity allows the use in automotive applications without additional protection devices, such as suppressor diodes or mon mode chokes.
Based on the high symmetry of the CANH and CANL output...
